Brake Kit Front Honda/Acura Blk Drilled
Wilwood
MPN: 140-12996-D
Price: $714.83 USD
Purchase details
Buying unit: Price per front axle kit.
In stock
Fitment
Fitment notes
- This front brake kit uses black four-piston DPHA calipers and drilled/slotted 262 mm (10.32-inch) rotors.
- The parts list includes the front calipers, left/right rotors, BP-10 axle pad set and listed hardware.
- Requires the original 262 mm rotor/spindle configuration.
- Vehicles originally equipped with 240 mm rotors and spindles are excluded, even if their rotors have been upgraded.
- Wilwood specifies at least 15-inch wheels, but wheel diameter alone does not establish clearance.
- Check the manufacturer's drawing against the actual wheel.
Application and compatibility
Requires compatible original-equipment spindles designed for 262 mm front rotors. Spindles from 240 mm rotor applications are incompatible even after a rotor change. The kit accepts compatible OE hoses and retains the factory master cylinder and ABS function. Some 15-inch wheels fit; DS-967 requires at least 0.080 inch between the wheel and caliper throughout.
Description
Wilwood 140-12996-D upgrades compatible Honda/Acura front brakes with black four-piston DPHA calipers and 10.32-inch drilled/slotted rotors while retaining the factory master cylinder and ABS function.
| Specification | Value |
| Manufacturer part number | 140-12996-D |
| Calipers | 4 pistons; black powder coat; lug mount |
| Rotor Diameter | 10.32 in / 262 mm |
| Rotor Thickness | 0.83 in |
| Rotor Material | Iron |
| Rotor Finish | Black E-coat; drilled and slotted |
| Pad Compound | BP-10 |
| UPC | 889545018462 |
Key features
- Forged DPHA calipers with stainless pistons
- Direct mounting to compatible OE 262 mm-rotor spindles
- Accepts OE brake hoses; .00 hub-offset change listed
Specifications
| Manufacturer part number | 140-12996-D |
|---|---|
| Calipers | 4 pistons; black powder coat; lug mount |
| Rotor Diameter | 10.32 in / 262 mm |
| Rotor Thickness | 0.83 in |
| Rotor Material | Iron |
| Rotor Finish | Black E-coat; drilled and slotted |
| Pad Compound | BP-10 |
What's in the box
- Two black DPHA calipers
- Left/right SRP drilled/slotted rotors
- BP-10 axle pad set
- Pad retainers, caliper mounting bolts, banjo bolts and crush washers
Installation hardware included.
Install & Results
Install & Results
At a glance
- Supporting modifications required:
- Retain compatible OE hoses or purchase suitable replacement hoses; hoses are not in the DS-967 parts list.
- Brake fluid and red Loctite 271 are installation supplies.
Manufacturer documents
Match hub lug pattern and wheel clearance before disassembly. Connect OE hose using the supplied banjo hardware and new crush washers; follow DS-967 torque limits. Bleed, check leaks/interference and complete the manual’s minimum brake-test procedure before use.
- Have an experienced brake installer verify the application, wheel clearance, hoses and fittings before installation.
- Review the complete parts list and installation instructions.
Warranty & Returns
Warranty
Warranty varies
Manufacturer warranty coverage, if any, is specific to the exact product and application. Apex Shift may help route a claim but does not expand, replace, or guarantee a manufacturer's coverage.
Wilwood’s published policy disclaims express and implied manufacturer warranties for its parts. Review the manufacturer’s warranty disclaimer supplied with the kit.
Manufacturer warranty policy
Wilwood sells its parts as is. Its terms exclude express and implied warranties, including merchantability and fitness for a particular purpose.