NTK 24302 Upstream Wideband Air/Fuel Ratio Sensor
NGK
MPN: 24302
Price: $108.49 USD
Purchase details
In stock
Description
NTK 24302 is a heated wideband air/fuel-ratio sensor for the listed V6 applications. Its terminated five-lead harness connects to the matching original vehicle connector.
- OE-type heated wideband sensing element.
- Five leads; published lead length approximately 11.5 inches / 290 mm.
- Upstream positions only.
- On 2004–2007 Accord 3.0L models, this part serves the rear cylinder bank.
- One sensor; front and rear banks can require separate sensors.
Match the engine, sensor position, connector and lead routing. A matching vehicle name alone does not make this a replacement for every oxygen sensor on that vehicle.
Key features
- Heated wideband sensor
- Terminated five-lead connection
Specifications
| Manufacturer part number | 24302 |
|---|---|
| Sensor type | OE-type heated wideband air/fuel ratio |
| Connection | five-lead terminated harness |
| Published lead length | approximately 11.5 in / 290 mm |
| Location | upstream; bank depends on the application |
| Contents | one sensor |
What's in the box
- 24302 oxygen sensor
Install & Results
Install & Results
NTK oxygen-sensor installation instructions
NTK 24302: Identify the correct upstream bank and compare the connector and lead routing before removal. Allow the exhaust to cool, then disconnect and remove the original sensor with an oxygen-sensor socket. Remove the protective cap just before installation. If the threads are not already coated, apply only the supplied sensor-safe anti-seize to the threads, keeping it away from the sensing element. Start the sensor by hand and tighten to the specified torque without twisting the lead. Use a new supplied gasket where applicable, reconnect the original connector, and secure the lead clear of exhaust heat and moving parts. Do not use an impact wrench, drop the sensor, or contaminate it with solvents, oil or grease.