CRS5394H3D Honda/Acura D16 / ZC H-Beam Connecting Rods — Set of 4
Eagle
MPN: CRS5394H3D
Price: $321.99 USD
Purchase details
In stock
Fitment
Fitment notes
Not for use in pollution-controlled vehicles.
Description
Eagle CRS5394H3D is a set of four forged 4340 steel H-beam connecting rods for the Honda/Acura D16 / ZC engine configuration. The rods use 5.394-inch center spacing, 0.748-inch full-floating piston-pin bores and 3/8-inch ARP 2000 bolts.
Match the piston pins, crank journals, bearings and assembly clearances during a qualified engine build. Use Eagle's instructions for the supplied bolts and lubricant.
For competition engines.
California residents: WARNING: Cancer and Reproductive Harm. www.P65Warnings.ca.gov.
Specifications
| Manufacturer part number | CRS5394H3D |
|---|---|
| Engine family | Honda/Acura D16 / ZC |
| Quantity | set of four connecting rods |
| Construction | forged 4340 steel H-beam |
| Fasteners | 3/8 in ARP 2000 bolts |
| Center-to-center length | 5.394 in |
| Full-floating piston-pin bore | 0.748 in |
| Pin-end width | 0.716 in |
| Rod journal diameter | 1.771 in |
| Housing bore | 1.890 in |
| Big-end width | 0.892 in |
| Typical rod weight | 535 g |
| Use restriction | competition engines; not for pollution-controlled vehicles |
Install & Results
Install & Results
Eagle/ARP rod bolt installation instructions (PDF)
Eagle bolt identification and torque guide
Have an engine builder match rod length, piston-pin size and style, crank journal, bearing housing bore and rod side clearance to the build. Clean the rods and bolts, align the caps correctly, and alternate tightening to keep each cap seated squarely. Identify the supplied Eagle/ARP bolts by their dimensions and markings. Follow Eagle's specified lubricant and torque or stretch procedure; use one method, not both, and do not substitute generic ARP bolt values.