AEM X-Series OBD-II CAN Wideband UEGO AFR Gauge Kit (Universal)
AEM ELECTRONICS
MPN: 30-0334
Price: $268.95 USD
Purchase details
In stock
Application requirements
Application notes
Application and compatibility
The OBD-II data function requires a CAN-based OBD port and supported software configuration on compatible 2008-and-newer vehicles.
Description
AEM 30-0334 adds wideband AFR data through a CAN-based OBD-II connection for compatible 2008-and-newer vehicles and logging/tuning software. This X-Series controller/gauge kit includes a Bosch LSU 4.9 sensor and OBD-II pass-through harness.
| Mounting | 52-mm cup; 61-mm bezel; 21-mm total depth; 5-mm cup depth |
| Sensor | Bosch LSU 4.9; M18×1.5 |
| Display | 8.0–20.0 AFR; inner numeric lambda 0.55–2.00 per manual |
| Optional Analog | Requires added wires/terminals; valid 0.5–4.5 V = 8.5–18 gasoline AFR |
| OBDProtocol | CAN OBD-II, configurable 250/500 kbps and 11/29-bit addressing |
| Power Wiring | Switched 12 V, 5-A fuse, ground |
Key features
- CAN-based OBD-II logging with configurable ECU address and PID settings
- AFR, lambda and oxygen-percentage display modes
- Factory resistor calibration with optional free-air calibration
Specifications
| Manufacturer part number | 30-0334 |
|---|---|
| Mounting | 52-mm cup; 61-mm bezel; 21-mm total depth; 5-mm cup depth |
| Sensor | Bosch LSU 4.9; M18×1.5 |
| Display | 8.0–20.0 AFR; inner numeric lambda 0.55–2.00 per manual |
| Optional Analog | Requires added wires/terminals; valid 0.5–4.5 V = 8.5–18 gasoline AFR |
| OBDProtocol | CAN OBD-II, configurable 250/500 kbps and 11/29-bit addressing |
| Power Wiring | Switched 12 V, 5-A fuse, ground |
What's in the box
- Gauge with black bezel and reversible black faceplate
- Bosch LSU 4.9 sensor and sensor cable
- OBD-II pass-through cable
- Mild-steel weld-in sensor bung
- Mounting bracket, two nuts and rubber mounting band
- Four butt connectors
Silver/white appearance kit 30-0300-ACC is sold separately. Analog and serial output wires are not populated in the supplied harness.
Install & Results
Install & Results
Installation also requires an exhaust sensor, power wiring and gauge mounting.
Manufacturer documents
Use the 30-0334 manual for OBD address configuration and pass-through connection. Supply separately switched/fused 12 V and ground. Analog/RS-232 outputs require adding the appropriate wires and terminals; they are not plug-ready from the supplied harness. Follow the full sensor-placement and dry gauge-mounting instructions.